Linux version 2.4.20 (cbellot@babu) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue Dec 31 23:32:30 CET 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
 BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data)
 BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
247MB LOWMEM available.
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Test ro root=302
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1199.675 MHz processor.
Console: colour VGA+ 80x34
Calibrating delay loop... 2392.06 BogoMIPS
Memory: 248628k/253888k available (1220k kernel code, 4872k reserved, 534k data, 112k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD mobile AMD Athlon(tm) XP 1400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1199.7259 MHz.
..... host bus clock speed is 266.6057 MHz.
cpu: 0, clocks: 2666057, slice: 1333028
CPU0
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/8231] at 00:11.0
Applying VIA southbridge workaround.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23DA-20, ATA DISK drive
hdc: _NEC CB-2100A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0304184, I/O limit 4095Mb (mask 0xffffffff)
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63, UDMA(100)
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 112k freed
hub.c: new USB device 00:11.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x56a/0x10) is not claimed by any active driver.
Adding Swap: 248996k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Real Time Clock Driver v1.10e
via-rhine.c:v1.10-LK1.1.14  May-3-2002  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xd000, 00:a0:cc:d8:03:5d, IRQ 9.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 0021.
Via 686a audio driver 1.9.1
ac97_codec: AC97 Audio codec, id: VIA97(Unknown)
via82cxxx: board #1 at 0xE400, IRQ 10
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Power Resource: found
Processor[0]: C0 C1 C2, 8 throttling states
ACPI: AC Adapter found
ACPI: Battery socket found, battery present
ACPI: System firmware supports S0 S1 S4 S5
ACPI: Thermal Zone found
slmdm: version 2.7.7 Dec 18 2002 17:04:08 (Smart Link Ltd.).
slmdm: country set is 0xb5 (USA).
Smart Link AMRMO modem.
amrmo: probe 1106:3068 VIA Technologies, Inc. AC97 Modem Controller : VIA3058 card...
PCI: Setting latency timer of device 00:11.6 to 64
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
ohci1394: $Rev: 578 $ Ben Collins 
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]
ieee1394: Host added: Node[00:1023]  GUID[00030d433411ff53]  [Linux OHCI-1394]